EasyIO Dip Switch Settings (SW1)

EasyConnection

EasyIO

EasyServer II

The EasyIO board has one eight position dip switch (SW1) which sets the I/O address of the board. The I/O address is selectable on 8 byte boundaries in the address range 0200 - 03EF. The address of the I/O register can be set by selecting one of the dip switch arrangements listed in the following table.

Note: Various DIP packages are used on Stallion boards. On the lever-type package, the lever is pushed in the desired direction (i.e. on or off). On the recessed variety you must press down on the desired end (on or off).

Note: The default for the first board is highlighted. Switches 7 and 8 of SW1 should always be OFF.

EasyIO Dip Switch (SW1) Settings

1	2	2	4	5	6	7	8	I/O Add
ON	ON	ON	ON	ON	ON	OFF	OFF	200
OFF	ON	ON	ON	ON	ON	OFF	OFF	208
ON	OFF	ON	ON	ON	ON	OFF	OFF	210
OFF	OFF	ON	ON	ON	ON	OFF	OFF	218
ON	ON	OFF	ON	ON	ON	OFF	OFF	220
OFF	ON	OFF	ON	ON	ON	OFF	OFF	228
ON	OFF	OFF	ON	ON	ON	OFF	OFF	230
OFF	OFF	OFF	ON	ON	ON	OFF	OFF	238
ON	ON	ON	OFF	ON	ON	OFF	OFF	240
OFF	ON	ON	OFF	ON	ON	OFF	OFF	248
ON	OFF	ON	OFF	ON	ON	OFF	OFF	250
OFF	OFF	ON	OFF	ON	ON	OFF	OFF	258
ON	ON	OFF	OFF	ON	ON	OFF	OFF	260
OFF	ON	OFF	OFF	ON	ON	OFF	OFF	268
ON	OFF	OFF	OFF	ON	ON	OFF	OFF	270
OFF	OFF	OFF	OFF	ON	ON	OFF	OFF	278
ON	ON	ON	ON	OFF	ON	OFF	OFF	280
OFF	ON	ON	ON	OFF	ON	OFF	OFF	288
ON	OFF	ON	ON	OFF	ON	OFF	OFF	290
OFF	OFF	ON	ON	OFF	ON	OFF	OFF	298
ON	ON	OFF	ON	OFF	ON	OFF	OFF	2A0
OFF	ON	OFF	ON	OFF	ON	OFF	OFF	2A8
ON	OFF	OFF	ON	OFF	ON	OFF	OFF	2B0
OFF	OFF	OFF	ON	OFF	ON	OFF	OFF	2B0
ON	ON	ON	OFF	OFF	ON	OFF	OFF	2C0
OFF	ON	ON	OFF	OFF	ON	OFF	OFF	2C8
ON	OFF	ON	OFF	OFF	ON	OFF	OFF	2D0
OFF	OFF	ON	OFF	OFF	ON	OFF	OFF	2D8
ON	ON	OFF	OFF	OFF	ON	OFF	OFF	2E0
OFF	ON	OFF	OFF	OFF	ON	OFF	OFF	2E8
ON	OFF	OFF	OFF	OFF	ON	OFF	OFF	2F0
OFF	OFF	OFF	OFF	OFF	ON	OFF	OFF	2F8
ON	ON	ON	ON	OFF	OFF	OFF	OFF	300
OFF	ON	ON	ON	OFF	OFF	OFF	OFF	308
ON	OFF	ON	ON	OFF	OFF	OFF	OFF	310
OFF	OFF	ON	ON	OFF	OFF	OFF	OFF	318
ON	ON	OFF	ON	OFF	OFF	OFF	OFF	320
OFF	ON	OFF	ON	OFF	OFF	OFF	OFF	328
ON	OFF	OFF	ON	ON	OFF	OFF	OFF	330
OFF	OFF	OFF	ON	ON	OFF	OFF	OFF	338
ON	ON	ON	OFF	ON	OFF	OFF	OFF	340
OFF	ON	ON	OFF	ON	OFF	OFF	OFF	348
ON	OFF	ON	OFF	ON	OFF	OFF	OFF	350
OFF	OFF	ON	OFF	ON	OFF	OFF	OFF	358
ON	ON	OFF	OFF	ON	OFF	OFF	OFF	360
OFF	ON	OFF	OFF	ON	OFF	OFF	OFF	368
ON	OFF	OFF	OFF	ON	OFF	OFF	OFF	370
OFF	OFF	OFF	OFF	ON	OFF	OFF	OFF	378
ON	ON	ON	ON	OFF	OFF	OFF	OFF	380
OFF	ON	ON	ON	OFF	OFF	OFF	OFF	388
ON	OFF	ON	ON	OFF	OFF	OFF	OFF	390
OFF	OFF	ON	ON	OFF	OFF	OFF	OFF	398
ON	ON	OFF	ON	OFF	OFF	OFF	OFF	3A0
OFF	ON	OFF	ON	OFF	OFF	OFF	OFF	3A8
ON	OFF	OFF	ON	OFF	OFF	OFF	OFF	3B0
OFF	OFF	OFF	ON	OFF	OFF	OFF	OFF	3B8
ON	ON	ON	OFF	OFF	OFF	OFF	OFF	3C0
OFF	ON	ON	OFF	OFF	OFF	OFF	OFF	3C8
ON	OFF	ON	OFF	OFF	OFF	OFF	OFF	3D0
OFF	OFF	ON	OFF	OFF	OFF	OFF	OFF	3D8
ON	ON	OFF	OFF	OFF	OFF	OFF	OFF	3E0
OFF	ON	OFF	OFF	OFF	OFF	OFF	OFF	3E8

Go to Top of Page

EasyIO Dip Switch Settings (SW1)

EasyIO Dip Switch (SW1) Settings

Copyright © 2007 Lantronix. All rights reserved