No.
|
Knowledgebase Reference
|
Description
|
|
1
|
58403 |
When installing an EasyConnection 8/64
PCI card under Windows NT, the driver fails to load and reports the following
error: "STLNATA driver cannot find the Interrupt because another device
may be using it". The PCI card fails to initialize. |
| 2 |
59943 |
After installing an EasyIO 8 PCI card in
a Linux system and then trying to access the port, I get the following error:
Operation is not supported.
After correctly modifying the stallion.c file I get compilation errors when
compiling the module.
|
| 3 |
57885
|
Can the EasyConnection host adaptor to
panel cable be extended beyond 5 feet? |
| 4 |
56988 |
Are the Brumby and Onboard multiport
adaptors supported under Microsoft Windows NT? |
| 5 |
60018 |
Does Stallion support UnixWare 7.1 with
the EasyIO and EasyConnection multi-port cards and which driver should I
use? |
| 6 |
59760 |
What is the default administrative
password for the EasyServer II and LantraServer? |
| 7 |
59374 |
How do I configure a pair of EasyServer
II's to be used to connect two networks together? |
| 8 |
59678 |
When installng an EasyIO 8 PCI card
under Red Hat 5.1 Linux (kernel version 2.0.34) I am unable to copy the
stallion.c and istallion.c files to /usr/src/linux/drivers/char as the
drivers/char directory does not exist. |
| 9 |
58520 |
Can Modems connected to a LantraServer
be shared/used by Windows 95 clients?
|
| 10 |
59300 |
What driver do I need when using the
EasyConnection XP async module with an EasyConnection host adaptor in a machine
running SCO OpenServer 5 or SCO UNIX? |
