Software for EasyServer II
(including LantraServer)

EasyServer II Flash Firmware 6.3.0

Flash firmware allows EasyServer II units to be updated in the field to newer versions of firmware as they are released.  The firmware is stored permanently in the unit's flash memory.

Supported Hardware 

• All EasyServer II units currently using firmware 6.X.
  Run the "SHOW SERVER" command at an EasyServer II command prompt to see the current firmware version.

NOTE:  EasyServer II (or LantraServer) units that have a firmware version of 5.X or earlier do not have flash memory fitted and cannot be upgraded in the field.  Contact your nearest Stallion office for upgrade options.

Released Software

Flash Firmware 6.3.0:

• es2-flash-630.gz (gzipped file)
• es2-flash-630.zip (zipped file)
  The gzipped or zipped flash images should be uncompressed and  can then be used with a TFTP server to upgrade the firmware of an EasyServer II.  See the EasyServer II manual for details.
• release notes

Related Information