Stallion Technologies Software Release Note ===================== ATA Driver for SCO Xenix ------------------------ CONTENTS ======== 1. General 2. Release History _______________________________________________________________________________ 1. General =========== Media Format ------------ The ATA Xenix driver is delivered in a gzipped disk image format and is a full driver diskette. The gzip file is a raw diskette image and needs to be written to a 1.44Mb diskette. Disk Image Contents ------------------- The disk image contains the Xenix drivers for EasyConnection and EasyIO, as well as various older products. _______________________________________________________________________________ 2. Release History =================== ATA 5.4.0 ========= Date 13-Feb-1998 Ver 5.4.0 Prev 5.3.1 Characteristics --------------- Bus Architectures Supported: ISA : Yes MCA : Yes EISA : Yes PCI : Yes Description of Release: This is the ATA 5.4 Release for the SCO Xenix Operating System. This is the first driver to support the new EasyIO-PCI and EasyConnection 8/64-PCI boards. It is also the first release to support the EasyConnection XP16 module. Compatible with: All previous ATA drivers New features and changes: 1. Support for the EasyIO-PCI board. 2. Support for the EasyConnection 8/64-PCI board. 3. Support for the EasyConnection XP16, XP8D4, XP8R and XP16R Modules. 4. Many bugs fixed. Bugs Fixed ---------- 1745 D3 prb ALL - odd-ball baud rates on XP panel 1890 D3 bug ALL - EIO-4 rev 3.0 HW change requires Easyadm update 2140 D3 bug ALL - Input buffer flushing causes software flow control to bre 2141 D3 bug ALL - Signetics based products change LF to LF/CR instead of CR 2192 D3 prb XEN - XENIX unable to route Auto PCI interrupts ATA 5.3.1 ========= Date 31 January 97 Ver 5.3.1 Prev 5.2.0, 1.4.1 Characteristics --------------- Bus Architectures Supported: ISA : Yes MCA : Yes EISA : Yes PCI : Yes Description of Release: This is a general ATA release for all supported operating systems. It is the first driver release that supports the EasyConnection XP modules, and the new EasyIO MK3 boards. Compatible with: (will install on top of and with) EasyIO/EasyConnection v1.x.x (on top of) ATA 3.0.x (with) ATA 5.x.x (on top of) All previous EASYUTIL installations New features and changes: 1. Support for EasyConnection XP panels. 2. Support for EasyIO MK3 boards. 3. Bccstty switch added to clear port stats counters. Bugs Fixed ---------- 1427 D3S bug ALL- RTS can get stuck low 1539 D3S bug ALL- ONboard/Brumby output performance reduced under ATA 5.1.3 1577 D3S bug ALL- Cacheing doesn't work with old boards under ATA5 1579 D3S bug ALL- corto test crashes slave of ONboard32 1597 D4S bug ALL- changing board types can confuse easyadm about resources 1600 D4S bug ALL- Allport stats screen help doesn't describe fields 1605 D3S bug ALL- mapcts flag does not work on ONboards and Brumbys 1607 D3S bug ALL- The ATA5.2 2681 slave crashed on most 128K brumbies 1644 D2S bug ALL- Onboards and Brumbies still don't work reliably with ATA5 1551 D1S bug ALL- Diags hangs with Level interrupts configured _______________________________________________________________________________ [END]