Stallion Technologies Software Release Note ===================== ATA Driver for UnixWare and SVR4 UNIX ------------------------------------- CONTENTS ======== 1. General 2. Release History _______________________________________________________________________________ 1. General =========== Media Format ------------ The ATA UnixWare and SVR4 driver is delivered in gzip format and is a full driver diskette. The gzip file is a raw diskette image and needs to be written to a 1.44Mb diskette. Disk Image Contents ------------------- The disk image contains the UnixWare and SVR4 UNIX drivers for EasyConnection and EasyIO. _______________________________________________________________________________ 2. Release History =================== ATA 5.5.0 ========= Date 9 March 99 Ver 5.5.0 Prev 5.4.0 Characteristics --------------- Bus Architectures Supported: [Y] ISA [Y] MCA [Y] EISA [Y] PCI Description of Release: This is general release of the ATA driver for SVR4. It is the first release to include support for the Rapid Access PCI board. Compatible with: All previous ATA releases. New features and changes: 1. Support for new Rapid Access PCI board. Bugs Fixed ---------- 2141 D3 bug ALL - Signetics based products change LF to LF/CR instead of CR 2180 D3 bug ALL - Problem in driver informing RX Break event 2299 D3 bug AT4 - Bccstty -j -m options don't work 2300 D3 bug AT4 - Bccstty flag halfstop can not be set 2435 D3 bug ALL - CD1400-RS422 panels do NOT support RI - SW has a bug 2461 D3 bug AT4 - TCGETX under SVR4 systems is broken ATA 5.4.0 ========= Date 4 December 97 Ver 5.4.0 Prev 5.3.1 Characteristics --------------- Bus Architectures Supported: [Y] ISA [Y] MCA [Y] EISA [Y] PCI Description of Release: This is a general release of the ATA drivers for all supported operating systems. This is the first driver to support the new EasyIO-PCI and EasyConnection 8/64-PCI boards. It is also the first release to support the EasyConnection XP16 module. Compatible with: All previous ATA releases. New features and changes: 1. Support for the EasyIO-PCI board. 2. Support for the EasyConnection 8/64-PCI board. 3. Support for the EasyConnection XP16, XP8D4, XP8R and XP16R Modules. 4. bugs fixed. Bugs Fixed ---------- 1158 D3 bug ALL - MCA config for EC8/32-MC is wrong 1427 D3 bug ALL - RTS can get stuck low 1434 D3 bug AT4 - Problems opening EasyIO8-M ports under SVR4 1539 D3 bug ALL - ONboard/Brumby output performance reduced under ATA 5.1.3 1551 D1 bug ALL - Diags hangs with Level interrupts configured 1577 D3 bug ALL - Cacheing doesn't work with old boards under ATA5 1579 D3 bug ALL - corto test crashes slave of ONboard32 1581 D3 ibg AT4 - easyadm -o, doesn't create inittab entries under SVR4 1597 D4 bug ALL - changing board types can confuse easyadm about resources 1600 D4 bug ALL - Allport stats screen help doesn't describe fields 1605 D3 bug ALL - mapcts flag does not work on ONboards and Brumbys 1607 D3 bug ALL - The ATA5.2 2681 slave crashed on most 128K brumbies 1636 D3 bug AT4 - Driver allows ioctls to complete even if the port has clo 1643 D3 bug AT4 - No states are reported for top 16 port on onboard 32 1644 D2 bug ALL - Onboards and Brumbies still don't work reliably with ATA5 1663 D4 bug AT4 - Cacheing doesn't work for onboards and boot time loadable 1713 D3 bug AT4 - Easyadm commit fails under Unixware 2.0 with PCI cards 1809 D3 bug AT4 - A value for rxthold cant be set using bccstty 1830 D3 bug AT4 - ports hang under extreme load 1890 D3 bug ALL - EIO-4 rev 3.0 HW change requires Easyadm update 1893 D3 ibg AT4 - Flow control problems with XP panels on 8/32-MC 1894 D3 ibg AT4 - Hardre flow control problems with Onboard2 1950 D3 bug AT4 - Cant create a UUCP port from within Easyadm 1954 D3 bug AT4 - Hangup on DCD drop flag doesn't appear on support report 2102 D3 bug AT4 - DSR status always reported as 0 or not asserted 2126 D4 ibg AT4 - Problems installing 8/64 PCI under Unixware 2.1.2 2140 D3 bug ALL - Input buffer flushing causes software flow control to bre _______________________________________________________________________________ [END]